Holz-Her Used Machine Inventory

***All used machines are fully inspected.  All parts which are missing, broken, or show excessive wear are replaced.  Each machine is fully tested to ensure proper operation.   Each machine is fully cleaned, but not painted.***

Edgebanders

Sprint 1436 (SN#6324) - 1994

$6000
30 Day Warranty - Parts Only
Refurbished and Ready To Go

  • 1901 Magazine
  • 1906 Cartridge Glue Station
  • 1816 Pressure Unit.
  • 1976 End Trim
  • 1942M Top/Bottom Trim
  • 1927 HD Profile Scraper
  • 1944 Jump Buffer

Request More Information

Sprint 1310-E (SN#1878) - 2004

$9500
30 Day Warranty - Parts Only
Refurbished and Ready To Go

  • No Pre-Milling 
  • 1903 Magazine 
  • 1906M Cartridge Glue Station 
  • 1816 Pressure Unit. 
  • 1822 End Trim 
  • 1942M Top/Bottom Trim 
  • Open Station for Profile Scraper
  • 1940 Buffer 

Request More Information

Sprint 1310 (SN#3006) - 2006

$9500
30 Day Warranty - Parts Only
Refurbished and Ready To Go

  • No Pre-Milling
  • PPC-221 Control Panel w/ 8” color screen
  • 1903 Magazine
  • 1906M Cartridge Glue Station
  • 1816 Pressure Unit
  • 1918 End Trim with PCS
  • 1942M Top/Bottom Trim with PCS
  • 1929 Profile Scraper with PCS
  • 1940 Buffer

Request More Information

Sprint 1315 (SN#194) - 2002

$12,000
30 Day Warranty - Parts Only
Repairs not yet started

  • 8 mm edge capacity
  • No Pre-Milling
  • PLC Screen Control
  • 1903 Magazine
  • 1906 Cartridge Glue Station
  • 1913 Pressure Unit
  • 1918 End Trim with PCS
  • 1942M Top/Bottom Trim
  • NO Corner Rounding Unit
  • 1929 Profile Scraper with PCS
  • 1940 Buffing
  • Feed Speed 11 MPM

Request More Information

Sprint 1315 (SN#4410) - 2005

$15,000
30 Day Warranty - Parts Only
Refurbished and Ready To Go

  • 8 mm edge capacity
  • No Pre-Milling
  • PLC Screen Control
  • 1903 Magazine
  • 1906 Cartridge Glue Station
  • 1913 Pressure Unit
  • 1918 End Trim with PCS
  • 1942M Top/Bottom Trim
  • 1832 Corner Rounding Unit
  • 1929 Profile Scraper with PCS
  • 1940 Buffing
  • Feed Speed 11 MPM

Request More Information

Sprint 1411 (SN#1050) - 2002

$9,500
30 Day Warranty - Parts Only
Repairs not yet started

  • 6 mm edge capacity
  • No Pre-Milling
  • PLC Screen Control
  • 1901 Magazine
  • 1906 Cartridge Glue Station
  • 1913 Pressure Unit
  • 1918 End Trim with PCS
  • 1942M Top/Bottom Trim
  • 1942M Top/Bottom Trim
  • 1964 Finish Scraper
  • 1944-K Jump Buffing
  • Feed Speed 12 MPM

Request More Information

Sprint 1416 (SN#1643) - 2000

$12,000
30 Day Warranty - Parts Only
Repairs not yet started

  • 12 mm edge capacity
  • No Pre-Milling
  • PLC Screen Control
  • 1901 Magazine
  • 1906 Cartridge Glue Station
  • 1913 Pressure Unit
  • 1918 End Trim with PCS
  • 1823 Rough top/Bottom Trim
  • 1942M Top/Bottom Trim
  • 1983 Corner Rounding Unit
  • 1929 Profile Scraper with PCS
  • 1964 Finish Scraper

Request More Information

Sprint 1417 (SN#225) - 2000

$12,000
30 Day Warranty - Parts Only
90% Refurbished - Finished when Sold

  • 12 mm edge capacity
  • Pre-Milling
  • PLC Screen Control
  • 1901 Magazine
  • 1906 Cartridge Glue Station
  • 1913 Pressure Unit
  • 1918 End Trim with PCS
  • 1823 Rough top/Bottom Trim
  • 1942M Top/Bottom Trim
  • 1983 Corner Rounding Unit
  • 1929 Profile Scraper with PCS
  • 1964 Finish Scraper

Request More Information

Sprint 1320 (SN#167) - 2005

$20,000
30 Day Warranty - Parts Only
Refurbished and Ready To Go

  • 12 mm edge capacity
  • No Pre-Milling
  • PPC-221 Control Panel w/ 8” color screen
  • 1901 Magazine
  • 1906 Cartridge Glue Station
  • 1913 MOT Pressure Unit (servo positioning)
  • 1918 End Trim with PCS
  • 1823 Rough top/Bottom Trim
  • 1824-MOT-6 To/Bottom Trim with (6) servos & multiple profile tooling
  • 1983 Corner Rounding Unit
  • 1929 Profile Scraper with PCS
  • 1964 Finish Scraper
  • 1944 Jump Buffing

Request More Information

Triathlon 1488 (SN#148) - 2003

$29,000
30 Day Warranty - Parts Only
90% Refurbished - Finished when Sold

  • 20 mm Edge Capacity
  • Screen Control
  • Servo Infeed Fence
  • 1961 Pre-mill station
  • 1901MOT3 Programmable Automatic magazine (3 servos)
  • 1907 – Ultra GranUPress Glue Station (granulate glue only)
  • 1926K Motorized pressure section (servo)
  • 1916 End trim - pneumatic swivel
  • 1962MOT3 – Top/Bottom Trimmer (3 servos)
  • 1966MOT5 - Top/Bottom Trimmer (5 servos) – Multiple Profile Tooling
  • 1933/1934 MOT6 - 4 MOTOR Corner Rounder (6 servos)
  • 1927 MOT1 HD Profile Scraper (1 servo – in/out)

Motorized Beam - Variable Speed 10-20 MPM

Request More Information

Triathlon 1488 (SN#150) - 2004

$29,000
30 Day Warranty - Parts Only
Repairs not yet started

  • 20 mm Edge Capacity
  • Screen Control
  • Servo Infeed Fence
  • 1961 Pre-mill station
  • 1901MOT3 Automatic magazine (3 servos)
  • 1907 – Ultra GranUPress Glue Station (granulate glue only)
  • 1926K Motorized pressure section (servo)
  • 1916 End trim - pneumatic swivel
  • 1962MOT3 – Top/Bottom Trimmer (3 servos)
  • 1966MOT5 - Top/Bottom Trimmer (5 servos) – Multiple Profile Tooling
  • 1933/1934 MOT6 - 4 MOTOR Corner Rounder (6 servos)
  • 1927 MOT1 HD Profile Scraper (1 servo – in/out)
  • 1964 Surface Scraper
  • 1944K Jump Buffing

Motorized Beam  -  Variable Speed 10-20 MPM

Request More Information

Triathlon 420 (SN#4162) - 1999

$20,000
30 Day Warranty - Parts Only
Repairs not yet started

  • 20 mm Edge Capacity
  • Screen Control
  • 1901 Magazine
  • 1906 Cartridge Glue Station
  • 1926K Motorized pressure section
  • 1916 End trim - pneumatic swivel
  • 1962 Top/Bottom Trimmer
  • 1966 Fine Top/Bottom Trimmer
  • 1983 Corner Rounding Unit
  • 1927 Profile Scraper
  • 1944 Jump Buffing

Motorized Beam  -  Variable Speed 10-20 MPM

Request More Information

Auriga 1308-XL Auto (SN#405) - 2013

$49,000
90 Day Warranty - Parts and Labor, when installed by a certified tech
Refurbished and Ready To Go

  • 6 mm Edge Capacity
  • Automation Package for programmable setup
  • Motorized Pressure Beam (programmable)
  • PPC-221 Control Panel w/ 8” color screen
  • 1802 Pre-Milling
  • 1903 Auto Magazine
  • GJ-301 Glue Station
  • 1912-3 Pressure Section
  • 1918 End Trim
  • 1827-MOT4 Top/Bottom Trim with (4) servos
  • 1832 Corner Rounding Unit
  • 1929MOT2 Profile Scraper with (2) servos
  • 1964 Finish Scraper

10 MPM Feed Speed

Request More Information

Auriga 1308-XL (SN#661) - 2015

$45,000
90 Day Warranty - Parts and Labor, when installed by a certified tech
Refurbished and Ready To Go

  • 6 mm Edge Capacity
  • PPC-221 Control Panel w/ 8” color screen
  • 1802 Pre-Milling
  • 1903 Auto Magazine
  • GJ-301 Glue Station
  • 1912-3 Pressure Section
  • 1918 End Trim with PCS
  • 1827 Top/Bottom Trim with PCS
  • 1832 Corner Rounding Unit
  • 1929 Profile Scraper with PCS
  • 1964 Finish Scraper
  • 1940 Buffer

10 MPM Feed Speed

Request More Information

Arcus 1334 (SN#244) - 2011

$59,000
90 Day Warranty - Parts and Labor, when installed by a certified tech
Refurbished and Ready To Go

  • 12 mm edge capacity
  • PPC221 Controller 8” Screen
  • 1802 Pre-Milling
  • Servo Infeed Fence
  • 1901 Magazine
  • 1905 Glue Station
  • 1913 MOT Servo Pressure Unit
  • 1918 End Trim with PCS
  • 1828 MOT2 Top/Bottom Trim (2 servos)
  • 1833 MOT4 Corner Rounding Unit (4 servos)
  • 1929 Profile Scraper with PCS
  • 1964 Finish Scraper
  • 1940 Buffer

Motorized Pressure Beam (Belt)  -  Variable Speed 10-20 MPM

Request More Information

Arcus 1334 (SN#483) - 2015

$80,000
90 Day Warranty - Parts and Labor, when installed by a certified tech
Refurbished and Ready To Go

  • 12 mm Edge capacity
  • PPC315 Controller 15” Screen
  • 1802 Pre-Milling
  • Servo Infeed Fence
  • 1901 Magazine
  • GJ301 GluJet
  • 1914 MOT
  • 1925 End Trim
  • 1828 MOT 2 Top/Bottom Trim (2 servos)
  • 1833 MOT4 Corner Rounding Unit (4 servos)
  • 1927 MOT1 HD Profile Scraper (1 servo – in/out)
  • 1964 Finish Scraper

Motorized Pressure Beam (Belt)  -  Variable Speed 10-25 MPM

Request More Information

Contriga 1366 (SN#43) - 2007

$50,000
90 Day Warranty - Parts and Labor, when installed by a certified tech
90% Refurbished - Finished when sold

  • 20 mm edge capacity
  • PPC221 Controller 8” Screen
  • Motorized Infeed Fence
  • 1961 – HD Pre-Mill
  • 1901MOT 3 – Programmable Magazine (3 servos)
  • 1907 – Ultra GranUPress Glue Station (granulate glue only)
  • 1914MOT – Servo Pressure Section
  • 1819 – HD End Trim (high speed)
  • 1962MOT3 – Top/Bottom Trimmer (3 servos)
  • 1966MOT5 - Top/Bottom Trimmer (5 servos) – Multiple Profile Tooling
  • 1833MOT4 - Corner Rounder (4 servos)
  • 1927 MOT1 HD Profile Scraper (1 servo – in/out)
  • 1851 – Oscillating Jump Buffer

Motorized Pressure Beam (Belt)  -  Variable Speed 10-25 MPM

Request More Information

Contriga 1368 (SN#82) - 2007

$60,000
90 Day Warranty - Parts and Labor, when installed by a certified tech
Repairs not yet started

  • 20 mm edge capacity
  • PPC221 Controller 8” Screen
  • Motorized Infeed Fence
  • 1961 – HD Pre-Mill
  • 1901MOT 3 –Magazine (3 servos)
  • 1907 – Ultra GranUPress (granulate glue only)
  • 1914MOT – Servo Pressure Section
  • 1819 – HD End Trim (high speed)
  • 1962MOT3 – Top/Bottom Trimmer (3 servos)
  • 1966MOT5 - Top/Bottom Trimmer (5 servos) - Multiple Profile Tooling
  • 1933/1934 MOT6 - 4 MOTOR Corner Rounder (6 servos)
  • 1927 MOT1 HD Profile Scraper (1 servo – in/out)
  • 1933/1934 MOT6 - 4 MOTOR Corner Rounder (6 servos)
  • 1927 MOT1 HD Profile Scraper (1 servo – in/out)
  • 1851 – Oscillating Jump Buffer

Motorized Pressure Beam (Belt)  - Variable Speed 10-25 MPM

Request More Information

Lumina 1380 (SN#151) - 2016

$90,000
6 month Warranty - Parts and Labor, when installed by a certified tech
90% refurbished - Finished when sold

  • DEMO MACHINE
  • 8 mm Edge Capacity
  • PPC 319 Control System - 19" Color Touch Screen
  • Automation Package for programmable setup
  • Motorized Pressure Beam (programmable)
  • 1802 Pre-Milling
  • Servo Infeed Fence
  • Ltronic NIR (Near Infrared) Unit
  • GluJet GJ-302 (cart/gran) - Tracing Nozzle
  • 1913 MOT Servo Pressure Unit
  • 1918 End Trim with PCS
  • FR-701-MOT6 Top/Bottom Trim (6 Servos)
  • FF-701-MOT4 Corner Rounding Unit (4 servos)
  • 1929-MOT4 Profile Scraper (4 Servos) 
  • 1964 Finish Scraper
  • 1940 Buffer
  • Spray Unit for PUR Glue (infeed & outfeed)
  • Spray Unit for high gloss edgebanding (at end trim)

Motorized Pressure Beam  -  Variable Speed 12-18 MPM

Request More Information

Vertical CNC Machining Centers

EVOLUTION 7405 (SN#108) - 2013

CONTACT FOR PRICING

  • Ball screw drive in X-Y- and Z-axis
  • Manual Central lubrication for all linear guides in X, Y, and Z
  • Work piece support with roller wheels, pneumatically 
  • 2-Pop-Up Pin Stops (1 per side left/right) 
  • 4 Hose less Vacuum Pods - 80 mm x 80 mm Vacuum Pod Heads
  • 10 vertical boring spindles individually selectable

    • 5 in X- and 5 in Y-axis,
    • 2 double boring spindle for horizontal bores in the X-direction
    • 1 double boring spindle for horizontal bores in the Y-direction

  • 9 HP Fan Cooled Router Head 1,000-18,000 RPM HSK-63F
  • 6-Position Automatic Tool Changer 
  • Hand held control unit
  • PC control panel with 19" TFT Flat Screen

 

Request More Information

EVOLUTION 7405 (SN#140) - 2013

CONTACT FOR PRICING

  • Ball screw drive in X-Y- and Z-axis
  • Manual Central lubrication for all linear guides in X, Y, and Z
  • Work piece support with roller wheels, pneumatically 
  • 2-Pop-Up Pin Stops (1 per side left/right) 
  • 4 Hose less Vacuum Pods - 80 mm x 80 mm Vacuum Pod Heads
  • 10 vertical boring spindles individually selectable

    • 5 in X- and 5 in Y-axis,
    • 2 double boring spindle for horizontal bores in the X-direction
    • 1 double boring spindle for horizontal bores in the Y-direction

  • 9 HP Fan Cooled Router Head 1,000-18,000 RPM HSK-63F
  • 6-Position Automatic Tool Changer 
  • Hand held control unit
  • PC control panel with 19" TFT Flat Screen

 

Request More Information

Wide Belt Sanders

Boarke Wide Belt Sander
BKM-43-RRK 3-Head Sander (SN# FC14197)  - 2014

$29,000
Repairs not yet started

  • Boarke’s Frame is a weldment of 1” and ½” plate steel
  • 4 ea. 4000 lb. capacity Ball Screws for table raise/lower
  • Digital Controller 

    • Digital Readout in Inches or MM
    • ↑ And ↓ Buttons micro adjust thickness in .001” increments  
    • Micro-Adjustment hand wheel for final thickness in .001” increments
    • Automatic Thickness Set Up 

  • Motorized Thickness adjustment
  • Vacuum Table
  • Unit 1:  Contact Roll

    • 10” O. D. Contact Roll (85-90 Shore)
    • Dial Indicator shows position
    • 30 HP

  • Unit 2:  Contact Roll

    • 10” O. D. Contact Roll (60 - 65 shore)
    • Dial Indicator shows position
    • 25 HP

  • Unit 3:  Combi Unit

    • 5.5 “O.D. Contact Roll (50-55 Shore)
    • 2.8” wide finishing Pad
    • Abrasive Belt Cleaner
    • 20 HP

  • Photo electric belt tracking
  • Variable speed from 7 – 45 FPM
  • 5 HP drive motor

Request More Information